Fisher & Paykel Washing Machines Clearance Requirements
Fisher & Paykel washing machines installed in Australian homes require 20mm side, 50mm rear, and 50mm top ventilation clearance per manufacturer guidelines. Notable: wider side spacing than the 10mm category average (20mm required); generous top clearance of 50mm (default is 10mm) — cabinetry above must be 50mm or higher from the appliance top. Insufficient clearance can void warranty and cause premature compressor failure.
Side clearance
20mm
20mm
Rear clearance
50mm
50mm
Top clearance
50mm
50mm
Models in database
6
6
Door swing data
✓ All 6 confirmed
✓ All 6 confirmed
Installation Tips
- Push washing machine at least 50mm from the wall before securing — use a tape measure, not eyeballing.
- If installing under overhead cabinetry, confirm 50mm gap above the lid or top panel.
- Measure your cavity before purchase — washing machine dimensions vary by ±20mm between models within this brand.